Inspection chambers

SINCE A GREEN ROOF IS ESSENTIALLY A COVER, IT MUST PRIMARILY PROVIDE ADEQUATE RAINWATER MANAGEMENT AND DRAINAGE. INSPECTION CHAMBERS MUST MAKE IT EASY TO LOCATE AND INSPECT THE DRAINS PRESENT ON A GREEN ROOF, WHETHER THEY ARE ON THE ROOF SURFACE, NEAR THE PERIMETER CONTAINMENT, OR FAÇADE DRAINS. DEPENDING ON THE TYPE OF DRAIN, THEREFORE, DIFFERENT TYPES OF CHAMBERS MUST BE INSTALLED. HARPO VERDEPENSILE OFFERS A SERIES OF INSPECTION CHAMBERS SUITABLE FOR ALL NEEDS, PERFECTLY INTEGRABLE WITH THE OTHER ELEMENTS THAT MAKE UP THE GREEN ROOF SYSTEM, THUS GUARANTEEING THE CORRECT MANAGEMENT OF RAINWATER DRAINAGE. IN FACT, HARPO CHAMBERS ARE ALL DRAINING, THANKS TO VERTICAL CUTS, AND CAN BE RAISED THANKS TO SPECIAL MOUNTS, IN CASE THE SYSTEM THICKNESSES ARE SIGNIFICANT.

PK5 / PK10 / PK12 DRAINING INSPECTION CHAMBERS FOR DRAINS LOCATED ON THE ROOF SURFACE

PK drainage inspection chambers are designed to make the drains located on the surface of a green roof visible and inspectable. Available in aluminum, stainless steel, or aluzinc with a removable cover, they are equipped with side slots and slots on the cover for rainwater drainage, and have a perimeter flange on all four sides for connection to the protective layers. The chamber can also be supplied with a thermally insulated cover upon request, a feature that helps to avoid thermal bridges in the vicinity of drains in insulated roofs. PK-H risers are used to achieve different heights. A version with a grated cover is available upon request.

Material	Measurements (mm)	Chamber height (mm)	Elevated height (mm)
1.4301 stainless steel	250×250	50/100/120	100/200
Aluminum	250×250	50/100/120	100/200
Aluzinc	250×250	50/100/120	100/200

DRAINING CONTROL CHAMBERS FOR PKF5 / PKF10 / PKF12 FAÇADE DRAINS

PKF draining control chambers to make facade drains visible and inspectable near perimeter containments either at the foot of the wall or at the facade in green roofs. Available in aluminum, stainless steel or aluzinc with a removable cover, equipped with slots on the side and on the cover for stormwater drainage, fitted with a three-sided perimeter flange for connection to the protective layers and openable side, arranged to adapt the sump to facade drains as well.

A single chamber to make drains at the foot of walls or wall drains inspectable due to the adaptability of the model. The chamber is also supplied on request in a heat-insulated cover version, an expedient that makes it possible to avoid thermal bridges near drains present in heat-insulated roofs. PK-H elevations are used to achieve different heights.

Material	Measurements (mm)	Chamber height (mm)	Elevated height (mm)
1.4301 stainless steel	250×250, 300×300	50/100/120	100/200
Aluminum	250×250, 300×300	50/100/120	100/200
Aluzinc	250×250	50/100/120	100/200

DRAINING CONTROL CHAMBERS FOR PKS5 / PKS10 / PKS12 CORNER DRAINS

PKS draining control chambers to make drains visible and inspectable near corners in green roofs. Available in aluminum, stainless steel or aluzinc with a removable cover, equipped with slots on the side and on the cover for stormwater drainage, without a perimeter flange. The chamber is also supplied on request in a heat-insulated cover version, an expedient that makes it possible to avoid thermal bridges near drains present in heat-insulated roofs. PK-H elevations are used to achieve different heights.

Material	Measurements (mm)	Chamber height (mm)	Elevated height (mm)
1.4301 stainless steel	250×250	50/100/120	100/200
Aluminum	250×250	50/100/120	100/200
Aluzinc	250×250	50/100/120	100/200

ELEVATIONS FOR PKH CHAMBERS

elevations for drainage control chambers in aluminum -stainless steel – aluzinc
available heights: 10 or 20 cm

PK-ARPAV INSPECTION CHAMBERS FOR GRESS FLOORING INSERT

adjustable in height with integrated filter for drains on paved areas

Contents include:

galvanized or stainless steel gutter body
slotted drainage system on all four sides
re-positionable supports for 20 mm or 30 mm stoneware floor insert (with 3 mm adhesive layer)
stainless steel connectors
the stone piece shown in the picture is excluded from delivery

U-shaped profile for stoneware flooring insert:

galvanized or stainless steel profile
height depending on the thickness of the flooring to be “housed” as a closure (with adhesive layer considered 3 mm)

PK-CLF/ AK-CLF INSPECTION CHAMBERS FIXED HEIGHT FOR SLOTTED CHANNELS CLF

for linear slotted channels without cover
galvanized or in stainless steel with standard grating
prepared for connection to linear slotted channels
drain side or bottom of chamber

PK-AR GRATED INSPECTION CHAMBERS

Height-adjustable with integrated filter for drains on paved areas Height-adjustable PK-AR inspection chambers for protection and inspection of drains on paved areas. The grating has a connection arrangement to any drainage channels on all four sides, it will be sufficient to remove the pre-cut parts. To ensure greater durability of the element, the body, supports, grating and filter are made of corrosion-resistant steel.