Features

• Does not impose peak loads
• Does not cause thermal bridging
• Permanent and unbreakable
• Provides no mechanical attachment to the roof and no discontinuity in waterproofing
• being disengaged from the substrate, the installation will be independent and subsequent to the waterproofing installations.
• integrated to the green roof technological stratigraphy: simplicity of installation, total functional compatibility when fully operational, does not involve differential effects on the development of vegetation
• does not cause interruption of drainage on the project surface
• Excellent aesthetics: the device is integrated into the Green Roof system, and only the markers protruding from the substrate will remain visible where they are anchored with carabiners.

MediSave 3D anchoring system

Permanent anchoring devices designed to be integrated into Harpo green roof systems. MediSave 3D is in accordance with EN 795:2012, CEN/TS 16145:2013 and type C and type A UNI 11578:2015, it is suitable for securing people working for maintenance at the edge of flat roofs and with an inclination up to 5° max.

The device will be assembled directly on site, integrated with the green roof technological stratigraphy and will be subsequently ballasted with appropriate bulk material weighdown. The ballasting will be evaluated by the manufacturer depending on the conditions of use but will commonly require the installation of about 8-10 cm TerraMediterranea compacted substrate, for a total weight of no less than 720 kg (75 kg/sqm) in dry conditions.

The overall height of the pole measured at the center of the eyebolt is 29.1 cm.

All installed products shall be clearly, indelibly, and permanently marked using a method that has no detrimental effect on the material.

The marking contains the following information:

• the product identification code
• the manufacturer’s batch number or component serial number (last 2 digits year of manufacture)
• the NAME and trademark of the manufacturer or supplier
• the reference standard and type of product
• the maximum number of simultaneously insured users

All products are guaranteed 10 years for galvanized steel components, 15 years for stainless steel components, 20 years for polymeric components. The fall arrest devices are also equipped with appropriate signage. The fall arrest system, upon completion, is accompanied by Certification containing:

• Certification of product conformity
• Declaration of correct installation after on-site verification
• System use manual
• Maintenance record
• Graphic design drawing

 Structural elements

No. 2 press-bent Omega in AISI 304 steel, 5mm thickness;

No. 1 Male Eyebolt M12 in AISI 316;

No. 1 M12 self-locking nut in AISI 316;

No. 8 M10x20 TE Screw in AISI 316;

No. 8 Washer 10×30 in AISI 316;

No. 8 Self-Locking Nut M10 in AISI 316

No. 1 GG®40 three-dimensional cellular confinement structure module, h=75 mm;

No. 1 MF1 Medifilter filter cloth;

Harpo TerraMediterranea, compacted thickness ≥ 8 cm.

FEATURES OF THE THREE-DIMENSIONAL STRUCTURE